High Quality Cable Accessory 66kv Gis Termination

• Customization: Available
• Certification: ISO9001
• Protection: Corrosion Resistance
• Model NO.: YJZGGC
• Installation: Vertical
• Standard: IEC
• Color: White
• Voltage: 38/66kv
• Material: Liquid Silicone Rubber
• Transport Package: Wooden Case
• Specification: 240-1600mm2
• Trademark: dongfeng
• Origin: China
• HS Code: 8535900090
• Production Capacity: 50000/Year
• Package Size: 162.00cm * 40.00cm * 100.00cm
• Package Gross Weight: 100.000kg

Product Description

 

Product Description

YJZGGC Plug Dry Type GIS Termination
Our company produces two main YJZGGC plug dry type GIS termination, YJZGGCD short plug dry GIS termination and 4E-YJZGGCC long plug dry GIS termination, widely used for GIS electrical equipment and cable connections. They are composed of outer power, epoxy casting, prefabricated stress cone, cone prop, and tail tube. The main body of prefabricated soft silicone rubber is using imported liquid silicone rubber injection rubber molding soft dry structure, which has long-term stability of lasting hold power and electric field uniform ability. Epoxy is using epoxy resin vacuum casting molding, cone roof tight plug-dry structure. There's no need to fill insulating gas or oil, effectively ensure the long-term safe operation of the product. Our product is using multiple sealing structure which can effectively prevent the leakage of water immersion. All of the seals are using imported NBR or silicon rubber material. All of the fastener raw-material are stainless steel with good waterproof seal performance.
Our products meet the standards of IEC60859 (1999), IEC62271-209 (2007) in accordance with GIS electrical equipment. There are a little differences between the two standards, if users do not require in writing, generally based on the standard of IEC62271-209.

 

1. Pluggable rod  2. Locking sleeve  3. Stress cone  4. Epoxy bushing  5. Cone support  6. Spring attachment  7. Tail pipe  8. Cable

Size mm	48/66kV	64/110kV	80/138kV	127/220kV
L Short type	310	470	470	620
A Short type	900	1020	1020	1260
L Long type	583	757	757	960
A Long type	1200	1310	1310	1600

Main structure features:
Advanced structure: fully sealed plug dry-type structure, can firstly send epoxy casting and plugging to the GIS equipment factory and pre-installation it in the GIS equipment.
Easy installation: the length of plug-in structure of the cable is less than 300mm, dry-type with oil-free and gas free, greatly reducing the labor.

Type test and pre-identification test on 66~220kV cable accessories:

Item	Test requirement			Test type	Products type
	48/66	64/110	127/220		Porcelain bushing	Composite busing	GIS termination	Straight through/ Insulating joint	Soft dry type termination
Sealing fittings, porcelain bushing, composite bushing	0.25±0.01MPa/1h, no leakage			R	P	P	P	-	-
Epoxy bushing	0.6~0.7MPa/1h, no leakage
Prefabricated body partial discharge test	72kV	96kV	190kV	R	P	P	P	P	P
	Partial discharge in the background
Prefabricated body power frequency withstand voltage test	120kV	160kV	318kV	R	P	P	P	P	P
	30min, no flashover no breakdown
Partial discharge test at ambient temperature	72kV	96kV	190kV	T	P	P	P	P	P
	Partial discharge in the background
Thermal cycling voltage test	96kV	128kV	254kV	T	P	P	P	P	P
	20 cycles, no flashover no breakdown
Partial discharge at high temperature	72kV	96kV	190kV	T	P	P	P	P	P
	Partial discharge in the background
Lighting impulse voltage test and the subsequent power frequency withstand voltage test	450kV	550kV	1050kV	T	P	P	P	P	P
	10 times, no flashover no breakdown
	120kV	160kV	318kV
	15min, no flashover no breakdown
Immersion voltage test on outer protective sheath of direct-buried joint	60/75kV impact both ends, 30/37.5kV impact one end to the ground		60/95kVimpact both ends, 30/47.5kV impact one end to the ground	T	-	-	-	P	-
Sealing test after installing accessories	0.25±0.01MPa/1h, no leakage			T	P	P	P	P	P
Outdoor termination frequency voltage test in rain	140kV	185kV	460kV	T	P	P	-	-	P
	1min, no flashover no breakdown
Post insulator voltage test	20kV/1min, no flashover no breakdown			T	P	P	-	-	-
Outdoor termination radio interference test	61kV	81kV	140kV	A	P	P	-	-	P
	1MHz radio interference, voltage≤450μV		1MHz radio interference, voltage≤500μV
Accessories sample test	Detect accessories system, no significant errors effect operating			T	P	P	P	P	P
DC voltage test	/		20kV/1min between inner conductor and metallic screen of joint, no breakdown	T	-	-	-	P	-
Conductor connecting pole (tube) pressure welding fitting performance test	After crimping, the total resistance is not 1.2 times more than the same length and cross sectional area of conductor			T	P	P	P	P	P

CERTIFICATE

Type test report and KEMA report for 1kV to 220kV cable accesories
 

 

TEST AND PRODUCTION EQUIPMENT

1000kV ultra-high voltage test hall, 500kV high voltage test hall, fully automatic rubber injection molding system, 100000 level dust-free workshop
 

COMPANY PROJECTS

Our company's business and services span across dozens of provinces and cities nationwide, and we also export to international markets, including Australia, Peru, South Africa, Russia, the United States, Cyprus, New Zealand, Bangladesh, Tanzania, and more. We have gained significant recognition and reputation both domestically and internationally. In recent years, the company has been continuously enhancing its quality management and service systems. We are not content with our current achievements; instead, we strive for continuous progress, consistently reaching new milestones.